PRODUCT DESCRIPTION
LYSAGHT® EASYCLAD® steel cladding is well suited to a variety of contemporary needs. Its versatility and ability to provide exterior and interior to provide wide design applications in stylish clean-lined panels.

LYSAGHT® EASYCLAD® offers cost and time saving and also strength and lightness of steel for extra span ability, minimum framework and high compact resistance.

Typical applications include fascia, walling cladding, feature panels, screens, awning, soffit linings and non-acoustic ceilings.

Custom-cut lengths are available in between 300mm and 9000mm. Recommended length would be 6000mm.

FEATURES & PRODUCTS DESCRIPTION
LYSAGHT® KLIP-LOK® 406 is a strong, durable and versatile long length roofing and walling profile. It combines the strength of steel, smart fluted pans and a lock-action rib design and concealed fastening to allow application on low pitched roof. It is also suitable for walling both horizontal and vertical installation.

The profile has an effective cover width of 400mm and a rib height of 41mm.

Custom-cut lengths are available at any measurement to a maximum transportable length.

APPLICATIONS
The profile can be used for any roofing and walling, fascia and soffit. The straight lines of the roof remain clean and smooth with its positive concealed clip fixing with no exposed fasteners.

PRODUCT BENEFITS

• Concealed fixing method.

• Total leak-proof and aesthetic solution.

• Conformity to International Building codes and standards.

• Excellent wind resistance.

• Lightweight yet exceptional strength

• All weather performance.

• Genuine LYSAGHT® material warranty and product certification.

FEATURES & PRODUCTS DESCRIPTION
LYSAGHT® LOCKED SEAM® is a standing seam roof system that can be used on pitched, curved and tapered roof forms.

The height of the seam is 32mm with a variable cover width from 300mm to 600mm*. Single or double flutes can be incorporated to accentuate the profile. The seams are mechanically field seamed in Single Lock (180°) or Double Lock (360°) producing a strong and rain proof joint.

LYSAGHT® LOCKED SEAM® is available in Preweathered Titanium Zinc, Patinated Copper or Mill Finished Copper, Stainless Steel, Aluminium and Clean COLORBOND® steel.

LYSAGHT® LOCKED SEAM® offers a watertight and good up lift wind resistance roofing solution that is ideal for areas with high rainfall intensity.

Maximum length are available as per on site rolling.

Its specially-designed height of the standing seam contributes to the modernity, lightness and regularity of the roofing in its architectural function, particularly when used on more complex shapes, giving them a distinctive 'high-tech' appearance.

PRODUCT BENEFITS

• Excellent water tightness.

• Designed to withstand high wind conditions.

• Offers multiple design options.

• Exclusive seaming process.

• Wide choice of metals with different finishes.

FEATURES & PRODUCTS DESCRIPTION
The LYSAGHT® PRESTIGE® Panel is another quality product which provides wider choices of durable and functional wall claddings to the building designs in the region.

• Roll-formed from ZINCALUME® steel is available in three Clean COLORBOND® prepainted steel systems with a wide range of colours to choose from.

• Three distinctive concealed-fastener profiles to choose from.

• Compatible trim and accessories readily available.

• High-strength design can be used for exterior and interior walls, as well as soffits.

• Panels are factory corrective-leveled during roll-forming to provide the flattest product possible.

• Available perforated for acoustical applications.

Custom-cut lengths are available in continuous length (up to 1200mm).

APPLICATIONS

• Vertical surface cladding

• Walling

• Fascias

• Feature wall, ceiling and fencing

Oil Canning
Flat metal surfaces (eg LYSAGHT® PRESTIGE® Panel) will display waviness commonly referred to as oil canning. This is caused by steel mill tolerances. Oil canning is a characteristic, not a defect, resulting from panels manufactured from light gauge metal. panels are to be factory corrective leveled to minimize oil canning. Oil canning is not a valid reason for panel rejection.

FEATURES & PRODUCTS DESCRIPTION
The distinctively good looking LYSAGHT® SELECT SEAM® is a concealed fastened roof system that is versatile for both vertical and incline applications. It is especially flexible for difficult hip and mansard roofs.

Continuous ribbed lines can be beautifully achieved over multiple changes in roof pitch. The  recommended minimum roof pitch is 7.5°.

APPLICATIONS
LYSAGHT® SELECT SEAM® has a narrow snap on rib that simulates traditional standing seam profile suitable for non-industrial projects.

It is widely used as a roof and wall/fascia with its capability to form a sleek pitch and curved roof.

Maximum length available is 11.8m (export) and 14m (local).

PRODUCT BENEFITS

• Architectural roofing.

• Economical version of standing seam roof.

• Easy to install with minimum accessories.

• Conceal fixed system.

FEATURES & PRODUCTS DESCRIPTION
LYSAGHT® SPANDEK® is a tough, symmetrical trapezoidal ribbed roofing and wall cladding profile, ideal where a stronger, bolder and more modern corrugated appearance is required.

LYSAGHT® SPANDEK® capitalizes on buildings requiring long spans as it permits wider purlin spacings and utilizes fewer fasteners. Its rigid trapezoidal ribs make it an excellent choice among designers for contemporary roof and wall cladding designs.

It can be sprung curved if the curvature falls between 20m and 60m. When used for wall cladding, the trapezoidal ribs can run vertically or horizontally. Available in long lengths, it is governed only by transportation considerations.

TYPICAL APPLICATIONS

• Fascia

• Feature wall

• Internal ceiling

• Soffit

PRODUCT BENEFITS

• Trapezoidal ribs can be run vertically or horizontally.

• Aesthetically pleasing and suits contemporary and modern design.

• Conformity to International Building codes and standards.

• Excellent wind resistance.

• Lightweight yet strong.

• First class resistance against corrosion, discoloration and tropical dirt staining.

• Genuine LYSAGHT® material warranty and product certification.

Crimp Curved Convex Roof
Crimp curved LYSAGHT® SPANDEK® steel cladding is designed to provide versatility and creativity to bring new and refreshing designs to commercial, industrial and domestic buildings. The combination of curves and contours in convex shapes with flats and angles in LYSAGHT® SPANDEK® have produced many aesthetically pleasing buildings.

This design freedom has resulted in significant cost savings in construction, mainly due to:

• Less supporting framework required for fascias, parapets and roofs.

• Simplified and reduced work involved in installation of fascia cladding.

• Reduction or elimination of many flashings and cappings.

• Less cladding material required to cover a given curve.

FEATURES & PRODUCTS DESCRIPTION
LYSAGHT® TRIMDEK® is subtle square fluted roofing and walling profile. The fluting in the pans provides strength and long spanning capabilities, making it one of the more economical LYSAGHT®  profiles.

It has bold, widely spaced ribs and is available in long lengths, governed only by transportation considerations. Due to its strength, spanning ability, lightness and rigidity, width support spacings can be used with safety.

LYSAGHT® TRIMDEK® can be curved by crimp curving process. it is available in both convex and concave shapes to provide versatility and creativity to  building designs. The minimum radius of curvature must be at least 450mm for convex and 550mm for concave to underside or pan of sheet.

Custom-cut lengths are available at any measurement to a maximum transportable length.

TYPICAL APPLICATIONS

• Roof

• Wall

• Fascia

• Feature wall

• Fencing

• Internal ceiling

• Soffit

PRODUCT BENEFITS

• Excellent wind resistance.

• Superior against severe rainfall intensity.

• First class resistance against corrosion, discoloration and tropical dirt staining.

• Genuine LYSAGHT® material warranty and product certification.

FEATURES & PRODUCTS DESCRIPTION
LYSAGHT® V-CRIMP® is a tough double-V wall and fascia profile that resists deformation over long spans - which means it can really take the knocks. It can be used vertically and horizontally to allow creative and flexible designs.

Although used mainly for commercial or industrial walling, it does not take a lot of imagination to see how it could be used as an interesting feature in domestic applications.

LYSAGHT® V-CRIMP® is produced from high tensile coated steel.

Custom-cut length are available in continuous length (up to 1200mm).

TYPICAL APPLICATIONS
Suitable for use as wall cladding, fascias, features wall, garage door cladding and fencing.